Показать сообщение отдельно
Старый 20.12.2018, 07:23   #20
Silents
 
Регистрация: 19.01.2009
Сообщений: 322
Цитата:
There is no definitive answer to this as every frame design is different. 6mm 8mm and 10mm bushings have a 3mm, 2mm and 1mm offset each respectively.
The amount of offset possible is limited by the bolt diameter in the 12.7mm hardware, hence why 10mm hardware has a 1mm offset.
по 2 мм оффсета на втулку = минус 4мм длины аморта. Может быть достаточно для ТС
Silents вне форума   Ответить с цитированием